loading
reading
writing
saving
searching
Olympus OM system flash components, T32 flash - $280 (St Paul)
QR Code Link to This Post
This listing is for the entire system. I won't sell components individually. Thank you for your understanding. Open to friendly, honest negotiation. I've priced towards the low end of what's asked online.
In person purchase, don't ask me to ship. Thank you.
All components are tested.
Evidence of wear: two of the battery compartment covers for T32 flashes are missing one (of 2) plastic tabs. The cover still locks shut. See photos.
The Olympus T32 flash was designed to provide through the lens (TTL) controlled flash with all illumination parameters controlled by the camera. T32 flashes also have their own sensors for automatic exposure regulation when used with any non-TTL compatible camera, and can also be set for full-manual operation. See online literature for exact specifications, for instance, https://www.mir.com.my/rb/photography/hardwares/classics/olympusom1n2/shared/flash/t32flash/index.htm#:~:text=%3C%20TTL%20%22OTF%22%20AUTO%20%3E%20(OM2%20series%2C,check:%20Neon%2Dflicker%20indication.%20Viewfinder%20indication:%20contact%20provided.
The Olympus T32 flash is compatible with Olympus 35mm film cameras that support TTL flash, such as the OM2 series, OM3Ti, OM4 series, OM40, OMAF and other Olympus SLR cameras that provide an OTF (Off The Film) flash exposure control system. It can also be used on other Olympus OM cameras like the OM-1, but only in manual or normal auto modes, not TTL. For any other camera with a standard ISO hot shoe, it will only work in manual or normal auto modes. It can also be used off camera (with a compatible camera) in TTL mode using Olympus TTL sync cables included in this listing. Multiple flashes can be networked for TTL control by a single camera.
Items included:
3 Olympus T32 flash units
1 Vivitar 550FD flash compatible with Olympus TTL hot shoes, provides TTL, auto sensor, or manual operation
1 Olympus TTL Auto Connector Type 4 which enables the Vivitar 550FD flash to connect to the Olympus TTL off-camera cables
1 Olympus Power Bounce Grip 2 which can mount a T32 or T20 flash, connect to TTL sync cables, connect to ISO sync cables, connect to an Olympus motor drive, and provide extra battery power for the attached flash
1 homemade cord to connect Power Bounce Grip to an Olympus motor drive. Equivalent to M. Grip Cord
2 Olympus Electronic Flash AC adapter 2 for using T32 flash without batteries
1 homemade adapter for connecting the Vivitar 550FD flash to the 6 volt output of a generic AC adapter
2 Olympus TTL Auto Multi Connectors for networking multiple off camera TTL flash units to a camera
4 Olympus TTL Auto Cord T5m, a 5 meter cord for remote, off-camera TTL flash sync
1 Olympus TTL Auto Cord T0.3m, a short TTL cord for connecting the Power Bounce Grip to the TTL sync port of a compatible Olympus camera
2 Olympus TTL Auto Cord T0.6m, coiled cords for short connections to Multi Connectors
1 Olympus Wide Adapter-ND Filter set T32 used to customize output of T32 flashes
1 Olympus T32 Color Filter Set used to color the output of T32 flashes
a homemade set of colored plastic gels for additional customization of color output of T32 flashes
3 pouches for T32 flash units
Olympus manuals for flash system components
Manual for Vivitar 550FD flash
Homemade ISO flash sync cord for test triggering of flashes attached to/via the Power Bounce Grip
Also see separate posting for a Minolta Auto Meter IIIF flash meter which I sometimes used with this Olympus system.