loading
reading
writing
saving
searching
Boat Davits EX1 Superwinch 12 Volt 1000 lb Dinghy Lift Cable w Manual - $1,900 (St. Paul)
condition:
good
make / manufacturer:
EX1 Superwinch on Boat Davit
model name / number:
1110, 1000 lb Dinghy Lift
QR Code Link to This Post
Works great!
Video is available of it running in our driveway. Motor runs and winds up cable as designed.
More photos are available of each boat davit.
We purchased these strong boat davits to mount to our boat for our dingy, but decided to go in a different direction. While in our possession they have been stored inside. Great boat davit for lifting a small boat, dingy, or Wave Runner out of the water. Each winch is line rated at 1000lbs. Will require a 12V switch and 12V battery (neither supplied) to connect and operate. Was going to use the Harbor Freight remote control switch, which is about $50.00. This would be an excellent addition to your boating experience!
Winch:
EX1 Superwinch
Rated line pull = 1000 lbs.
Voltage: 12V
Motor: = 1.3 hp
Remote control and Direct Switch
Gear Ratio: = 123:1
Weight: 16 lbs.
Wire Rope: = 25 ft. of 5/32
Winch Type: = Electric
Boat Davit:
Main rail thickness – 6” x 2”
Mounting Plate – 7 ½” x 12” x ¼”
Cable Length is approximately 10’ to 12’
Cable Diameter – 1/8”
Length of the 2 piece top support mount – 14”
Distance these top 2 piece supports extend over boat for mounting – 8”
Length of Lower Arm – 4’ 9 ½”
Length of Upper Arm – 3’ 9 ½”
Distance from Bottom to horizontal 2 piece top mount support – 1’ 11 ½”
Approx Full Height of Davits – 7’ 7”
Motor – 12” side to side
Approximate distance from top tip of davit to top of the 2 piece mounting bracket – 5’
Boat Davit pair, boat davit set, boat lift, dinghy lift, dingy winch, waverunner lift, small boat winch lift, Set of boat davits