I have for sale an Audio Source Amp 100 stereo amplifier.
If my ad is posted the amplifier is available.
This is a unique amplifier in that you can hook it up directly to a CD or tape player and bypass the preamp... or you can use it as a traditional amplifier and run it thru a preamp.
The amplifier is rated at 50 watts per channel, and it has a mono switch on the back, to run it at 150 watts for mono.
The amplifier is very well built, and you can hook it up to 2 sets of speakers using the high quality 5-way binding posts.
The overall condition of the amplifier is very good, and everything works fine on the amplifier.
Below are the specifications for the amplifier.
Stereo (8 ohm): 50W per channel, <0.2% THD+N
Stereo (4 ohm): 60W per channel, <0.2% THD+N
Bridged Mono (8 ohm): 150W, 1kHz, <1% THD+N
Frequency Response: 10Hz ~ 30kHz, +0dB/ -3dB
Signal to Noise Ratio: 100dB below 50W output into 8 ohms
Channel Separation: 70dB @ 1kHz, referred to 50W output 8 ohms
Input Sensitivity: 700mV input for rated 50W output 8 ohms