favorite
favorite
hide
unhide
flag

Posted

print

Metal Bending UF-25H Universal Fabricator by Shop Outfitters - $4900 (Roberts WI)

123456

condition: like new
delivery available
make / manufacturer: Shop Outfitters
model name / number: UF-25H Universal Fabricator
size / dimensions: 50" x 26" 63"

For Sale is a UF-25H Universal Fabricator by Shop Outfitters.

Minimally used metal bending fabricator, our loss is your gain! System was purchased and set-up as a potential business venture that took second to another opportunity.

Less than 4 months of used on this bending system that includes everything you need for metal fabrication, all in one.

Come see for yourself! Watch a demo video online or come out for a demonstration personally to see the capability this system has to offer.

http:\\Shopoutfitters.com

The UF-25H Universal Fabricator is a complete Fab Shop in a box! This machine will make up to 180 degree bends in up to 1-1/4” schedule 40 pipe, up to 1-5/8” (O.D.) 10 gauge round tubing and up to 1-1/2″ 10 gauge square tubing. It will also form a wide variety of sizes of flats, solid squares and solid rounds.

The #2011 Handy Bend, which comes standard with every Fabricator, can make bends on heavy material that much more expensive commercial press brakes cannot bend without doing some damage to their machine. The metal bending functions of the Fabricator run at just a fast enough enough speed to allow the operator more control over the various metal forming operations.

Please Contact Andy with any questions or to set-up a time for a demonstration! show contact info )

UF-25H Universal Fabricator Specifications:

•Pneumatic over Hydraulic foot operated pedal with release. Note: No electricity connected to this machine
•5 ton hydraulic ram cylinder
•Press frame with 25 ton hydraulic press cylinder

Handy Bend Press Brake w\V-Block
•1/8″ up to 10″
•3/16″ up to 8″
•1/4″ up to 4″

Handy Bend Press Brake w\V-Block removed:
•5/16″ up to 10″
•3/8″ up to 8″
•1/2″ up to 4″
•5/8″ up to 2″

Powder coated steel grey tube die storage cabinet with hydraulic control valve
•1-1/4″ standard die
•1-1/2″ standard die
•1-3/4″ standard die
•2″ standard die
•2-1/2″ standard die
•3″ standard die
•Four 3/4″ pins
•Sharp right angle bend attachment
•Support pin
•Stop block
•Storage rack for tube dies
•Bending arm & four 3/4″ pins and one 5/8″ pin
•Slide lock bar and head assembly
•Slide Lock
•Lock-N-Stop Gauge
•Instruction manual
  • do NOT contact me with unsolicited services or offers

post id: 6974544379

posted:

updated:

best of [?]