Grade 5 Titanium Flat Bar Ti-6AL-4V 1.375" x 1.5" [35mm x 38mm] - $6 (Inver Grove Heights)

Grade 5 Titanium Flat Bar Ti-6AL-4V 1.375" x 1.5" [35mm x 38mm] 1

Grade 5 Titanium Flat Bar Ti-6AL-4V 1.375" x 1.5" [35mm x 38mm] 1 thumbnail

google map

QR Code Link to This Post

New 1 3/8" x 1 1/2" Ti-6AL-4V Grade 5 Titanium bar. Actual dimensions are 1.388" x 1.524". Bought from Southwestern Alloys, Inc. Made by Ormet mill. to specification AMS4911E (see below for chemical composition and mechanical properties). See attached photo of the tag that came with the bars.

Grade 5 is heat treatable, high-strength, most commercially available Ti alloy for aerospace applications, for use up to 400˚C offering an excellent combination of high strength, toughness, and ductility along with good weldability and fabricability.

I will cut to length. $6/inch of length. I have two bars, one is 70" long, the other is 55" long.

AMS 4911
Revision: “R” issued 12/2019
Alloy: 6AL-4V
Product Forms: Titanium Alloy, Sheet, Strip, and Plate
Condition: Annealed

Composition Analysis
Aluminum: 5.5 – 6.75% Nitrogen (Maximum): 0.05%
Vanadium: 3.5 – 4.5% Hydrogen (Maximum): 0.015%
Iron (Maximum): 0.30% Yttrium (Maximum): 0.005%
Oxygen (Maximum): 0.20% Other Elements (Total): 0.40%
Carbon (Maximum): 0.08% Titanium: Balance

Tensile Properties (Minimums)*
Tensile: 130 – 134 ksi Elongation: 6 – 10%
Yield: 120 – 126 ksi

post id: 7875943667

posted: 2025-08-23 09:42

updated: 2026-01-22 16:08

♥ best of ^[?]

reading

writing

saving

searching

refresh the page.

Grade 5 Titanium Flat Bar Ti-6AL-4V 1.375" x 1.5" [35mm x 38mm] -...