loading
reading
writing
saving
searching
Diversey VECTRA Floor Finish, 1 Gallon. 3 AVAILABLE, NEW - $25 (WACONIA)
condition:
new
QR Code Link to This Post
Can be used in a variety of settings and climate conditions
Cures faster than traditional floor coatings
Long-lasting performance
Resistant to embedded dirt, black heel marks, scratching and scuffing
--- GOOGLE IT FOR MORE INFO ---
*Versatile finish responds well to 175–1500 rpm and UHS equipment Complies with California 2010 VOC Requirements Meets ASTM D2047 requirements for slip resistance* For Use On: Asphalt Tile, Tile or Vinyl Flooring in a variety of climate conditions. Directions For Use: Blockade areas to be stripped or finished. Position wet-floor signs around area to be cleaned. Strip floor using recommended Diversey stripper according to label directions. Apply 2–3 uniform coats of Vectra Floor Finish using a clean mop. To achieve higher gloss, apply additional coats. Allow 30 minutes drying time between coats (under normal conditions). Maintain: Dust mop or sweep then clean the floor with a mop or an automatic scrubber using the recommended Diversey cleaner following label directions. If desired, spray buff using recommended Diversey floor maintainer to enhance gloss. Before Recoating: Dust mop or sweep then deep scrub floor using Diversey cleaner according to label directions. Removal: Remove using recommended Diversey brand stripper according to label directions. Notes: For best results do not dilute, do not use on surfaces colder than 50° F (10° C). To avoid contamination, do not return unused product to original container. Floors will be slippery when wet or contaminated with foreign materials. Promptly clean spills and foreign materials. As with all products, test in a small, inconspicuous area before treating entire floor. Read product label prior to use