favorite
favorite
hide
unhide
flag

Posted

print

fits Troy Bilt chipper vac screen 3/4 & 1 1/8 inch 4&6 blade kit extra - $200 (Lino Lakes)

fits Troy Bilt chipper vac screen 3/4 & 1 1/8 inch 4&6 blade kit extra 1 thumbnailfits Troy Bilt chipper vac screen 3/4 & 1 1/8 inch 4&6 blade kit extra 2 thumbnailfits Troy Bilt chipper vac screen 3/4 & 1 1/8 inch 4&6 blade kit extra 3 thumbnailfits Troy Bilt chipper vac screen 3/4 & 1 1/8 inch 4&6 blade kit extra 4 thumbnailfits Troy Bilt chipper vac screen 3/4 & 1 1/8 inch 4&6 blade kit extra 5 thumbnail
condition: new
YOU CAN CONTACT ME AT 6 five one-786-4 two seven seven Fred

The 4 fan blade kit is $119.99 plus sales tax if in Minnesota. Shipping in lower 48 $10.00 for total of $129.99
The 6 fan blade kit is $159.99 plus sales tax if in Minnesot $10.00 shipping

I also make and repair chipper vac bags


THE ORIGINAL 3/4 INCH SCREEN from Troy Bilt WEIGHT IS 3 LBS 10.6 OZS

eBay user ID freders0

MY CUSTOM SCREENS WEIGHT IS 4 LBS 4.4 OZS



9.8 OZS HEAVIER THAN THE ORIGINAL Troy Bilt SCREEN THAT IS OVER A 1/2 LB MORE STEEL IN MY CUSTOM SCREEN



THE 2 PICTURES OF 2 SCREENS SHOW A OEM Troy Bilt SCREEN ON BOTTOM MY CUSTOM MADE SCREEN ON THE TOP. THE OTHER PICTURE SHOWS OEM ON THE LEFT MY CUSTOM SCREEN ON THE RIGHT. IF YOU LOOK VERY CLOSE YOU CAN SEE THE DIFFERENCE IN THE METAL THICKNESS OF THE CUSTOM SCREEN RIM.

This screen is NOT a OEM screen made by Troy Bilt. I had 100 of these made to my specifications. I bought a screen from a dealer that led me believe it was a Troy Bilt screen. When it arrived I saw a screen made of thinner steel and welded wrong. I took it to a friends home he cut the welds and rewelded it. I brought it home and tried to put it in my machine but it did not want to fit unless I twisted and turned it. I finally got it in the machine I started to vac my yard after about a hour I went to get a drink of water on my way back to the machine I saw the snout was twisted to one side after looking for the reason I found it was the screen The inner ring was to big that is why it would not fit easy into the opening. The welded edge was touching the frame of the machine at the bottom pushing the intake housing out at the bottom causing the snout to be twisted making it higher on one side. Then I got mad and spent way to much time looking for a company to make these screens for me. I did not want to make the same screen I wanted a better screen. I wanted 12 gauge steel not 14 gauge. I know for sure I would not be to using the 16 or 18 gauge that a after market seller sold me with the cheap paint job. I called him with my complaint he said send it back he would give me my money back with shipping both ways. After way to much time and 15 metal shops sent me walking I finally found a company to make them for me. They where willing to make them out of 12 gauge steel and weld them with a wire feed welder not spot welded they also put a powder coat red finish on them. To get a real good price I would have to buy a 1,000 of them I could not do that. So I had to pay more per screen to have 100 made. I believe a Troy Bilt owner like myself would be willing to spend a little extra money for a much better quality screen just like they where willing to pay more for a Heavy duty quality bag that I make.



$199.99 shipping for 1 of the screens not both in lower 48 states



I ALSO SELL FAN BLADE KITS FOR THESE MACHINE 4 BLADE KITS $119.99 6 BLADE KITS $159.99.



$119.99 for 4 fan kit plus $10.00 shipping $159.99 6 fan kit plus $10.00 shipping



Fits Troy Bilt 4 HP & 5 HP & 8 HP chipper vac pro machines



Troy Bilt Part number for the 3/4 inch screen is 1901116 or 47751



Troy Bilt Part number for the standard 1 1/8 inch screen is 1908467




This screen will fit the following Troy Bilt chipper vac models



47260, 47261, 47278, 47279, 47282, 47286, 47287, 47286c, 47287, 47287c



I will ship any place in the world you want. But need to contact me first to get you a shipping cost ( $19.00 in lower 48 states )



--------------------------------------------------------------------------------



What difference will a 3/4 inch screen make compared to 1-1/8 inch screen



The material that has been chipped or vacuumed must pass through the slots in the screen before it is discharged. The size of the slots in the screen determine how finely the materials are shredded. The standard 1-1/8 inch slotted screen supplied with all machines will produce up to an 8:1 reduction of material. The optional 3/4 inch slotted screen will produce more finely shredded material at a ratio of up to 11:1

post id: 7737148802

posted:

best of [?]

loading
reading
writing
saving
searching