2 - 14 Inch Aluminum Slotted Mag Wheel Rims

I only have the two Shelby rims left as I sold the two Superior rims with the slotted bolt holes. I have two - 14 inch aluminum rims for sale at $120 for 2 or $70 each for 1. Except for polishing they are in excellent shape. They will fit many older cars and light trucks, Fords, Dodges and AMC mostly, but also some GM, Japanese and European makes. They have a 5 bolt pattern. They are made by Shelby. Information on how to measure bolt pattern size is on web at
https://www.rsracing.com/tech-wheel.html
and 2 pretty good sites to check what cars they will fit on is
http://www.vehicle-bolt-pattern.com/
http://wheeltool.com/info/5bolt.html
They will need polishing to look like new. I had them on a 64 Ford Econline van. I have 1 of the two plastic center caps, one Shelby cap is missing and the other Shelby cap has lost most of it's silver plating. The tires on them are basically worthless as they are non radial bias ply and very old with checking and cracking, and not sure if they still hold air. Size info is as follows.
Shelby : rim size 14 x 7 bolt pattern 5 x 4.5 (114.3mm is same) hub diameter 3 1/4
Be sure to check your hub diameter size as I was reading on the net that someone went to a lot of trouble buying and polishing a "rare find" as he put it only to not be able to use them because his hub was too large. If you don't have measuring tools for the bolt pattern size and want a good guess you can use a CD or DVD and center it over the bolts on your hub. If the bolt studs are showing just under half of each stud you should have the 4.5 pattern. If the bolt studs are showing over half you have 4 3/4 pattern. The diameter of a CD or DVD is 4 11/16 so it is between the two most common sizes. This should give you a starting point as to wether the rims have a chance to fit or not.

Location: Minneapolis
it's NOT ok to contact this poster with services or other commercial interests

2 - 14 Inch Aluminum Slotted Mag Wheel Rims - $120 (Minneapolis)